Artelac 0.32% Sterile Eye Drops 30x0.5ml

SKU : PIARTU032030 PIP-Code : 2605210 EAN : 5027519009008
Artelac 0.32% Sterile Eye Drops are preservative free drops supplied in single use containers for effective relief from dry eyes.
Out of Stock
SKU
PIARTU032030
£3.70 £0.13 per dose
View delivery information
Questionnaire Icon This medicine can only be sold under the supervision of a Pharmacist, therefore you will need to answer a few short questions so our Pharmacist can ensure this product is suitable for you.
Information Icon This product is limited to 2 per customer

Browse our full range of:

Description

Artelac 0.32% Sterile Eye Drops

Artelac 0.32% Sterile Eye Drops provide effective relief from dry eyes. They contain hypromellose, a soothing solution which moistens the eye and gives tear-like lubrication to the eyes and eye lids for long-lasting relief, and can be used as often as required.

Artelac 0.32% Sterile Eye Drops are supplied in preservative free, sterile, single use containers, so are suitable for those who are hypersensitive to preservatives or who wear contact lenses. Wearers of soft contact lenses should remove their lenses before applying the drops and should wait for at least 15 minutes before they insert them again.

Artelac 0.32% Sterile Eye Drops
can also be used by women who are pregnant or breastfeeding.

Directions

  • The medicine is to be used only as drops placed into one or both eye(s).
  • Unless your doctor has told you differently, the standard dose is that one drop should be placed in the corner of the eye, nearest the nose, 3 to 5 times each day or as required to provide sufficient lubrication.
  • As dry eye is a condition which varies from person to person, the drops should be used as often as you think necessary, to relieve your dry eye(s). This may be more often than the standard dose but this should not cause any unwanted effects.
  • You should wait 5 minutes before using any other eye medication.
How to administer Artelac 0.32% Eye Drops:
  1. Sit down in front of a mirror so that you can see what you are doing.
  2. Wipe your eyes to clear any residual wateriness or discharge.
  3. Gripping the unit by the label end, remove a single-dose unit from the pack.
  4. Twist the cap off the single-dose unit.
  5. Pull your lower eyelid gently down, and then carefully place one drop inside the lower eyelid, in the corner closest to the nose.
  6. Release the lower eyelid, and blink a few times to make sure the eye is covered by the liquid.
  7. Repeat the procedure for your other eye.
  8. When you have finished discard the single-dose unit.

Ingredients

  • Active Ingredient: Hypromellose 0.32% w/v.
  • Other Ingredients: Sorbitol, Disodium Phosphate Dodecahydrate, Sodium Dihydrogen Phosphate Dihydrate and Purified Water.

Cautions

  • Keep your eye drops in a safe place where children cannot see or reach them.
  • Keep the eye drops at normal room temperature (do not store above 25oC).
  • Protect from light.
  • They are supplied in single-dose, single-use units, which should be discarded immediately after use.
Do not use Artelac 0.32% Sterile Eye Drops:
  • If you have been told or know that you have had a reaction to any of its ingredients.
Advice when using Artelac 0.32% Sterile Eye Drops:
  • All eye drops can cause a short term blurring of vision when first used so you should wait until your eyes are clear before driving or using machines.
  • These drops are sterile until first opened, so it is important to keep the drops as clean as possible during use.
  • Wearers of soft contact lenses should remove their lenses before administering these drops and should wait for at least 15 minutes before they insert them again.

Patient Information

Always read the product information. Click on the link below to view the Patient Information Leaflet. Requires Adobe Reader – if you cannot open the file, please
click here to download.

Patient Information Leaflet

Feefo Reviews